唐兴昌，男，1981年2月生，中共党员，工学博士，兰州理工大学红柳教授，有色金属先进加工与再利用国家重点实验室研究员，硕士研究生导师，入选江苏省双创人才，甘肃省、广东省科技特派员，江苏镔鑫钢铁集团有限公司副总工程师（兼职），广东省东阳光铝业企业重点实验室副主任（兼职）。主持国家自然科学基金项目1项，甘肃省科技重大专项3项，技术开发项目近30项，获省级科技进步二等奖1项，省级科技进步三等奖1项，发表SCI论文50余篇，发明专利10余件。

教育经历

2000.09-2004.07 中南大学 材料科学与工程 本科

2006.09-2009.07 北京有色金属研究总院 材料物理与化学 硕士

2009.09-2013.01 北京科技大学 材料科学与工程 博士

工作经历

2004.07-2006.08 西南铝业(集团)有限责任公司 熔铸厂 工艺工程师

2013.02-2015.12 酒泉钢铁(集团)有限责任公司 宏兴钢铁研究院 主任工程师

2016.01-2024.12 兰州理工大学 国家重点实验室 副研究员

2025.01-至今 兰州理工大学 国家重点实验室 研究员

研究方向

先进金属材料开发及应用；

数据驱动下的金属材料性能预测技术；

先进材料测试技术及实验分析；

金属新材料的研发与先进加工技术研究；

极端服役环境下金属材料的设计及其使役性能研究；

新一代储能材料研究。

论文及专利

1. Tang Xingchang; Cheng Ganghu; Jia Zhihui. Effects of different annealing temperatures on microstructure, mechanical properties, and magnetic properties of cold-rolled 20Mn23AlV non-magnetic structural steel. Journal of Iron and Steel Research International.

2. Tang Xingchang; Hu Xiaojun; Wu Xiaoyu. Insights into phosphorus doping on the structure and electrochemical performance of Li₂FeSiO₄/C nano-composites. Journal of Energy Storage.

3. Tang Xingchang; Kuang Chuan; Zhou Weilian. Effect of annealing process on microstructure and electrical conductivity of cold-rolled Ti microalloyed conductive steel. Materials Characterization.

4. Tang Xingchang; Wang Jingruo; Zhang Deyi. In-situ construction of carbon cloth-supported amorphous/crystalline hybrid NiCo-sulfide with permeable concrete-like morphology for high-performance solid-state hybrid supercapacitors. Chemical Engineering Journal.

5. Tang Xingchang; Cheng Ganghu; Liu Yajun. Microstructure and properties evolution during annealing in low-carbon Nb containing steel with high strength and electrical conductivity: an experimental and theoretical study. Journal of Materials Research and Technology-JMR&T.

6. Tang Xingchang; Gao Shiyao; Zhang Deyi. One-step solid-state synthesis of NiₓPᵧ @C nanocomposites for high-performance hybrid supercapacitor. Journal of Alloys and Compounds.

7. Tang Xingchang; Hou Yuanyuan; Liu Yiwen. Microstructure and mechanical properties of CoCrFeNiTa high entropy alloy prepared by mechanical alloying and spark plasma sintering. Materials Characterization.

8. Tang Xingchang; Li Yang; Gao Shiyao. Carbon-coated Ni₂P nanoparticles coated on CNTs synthesized by an in-situ solid-state method for high-performance hybrid supercapacitors and lithium-ion batteries. Journal of Energy Storage.

9. Tang Xingchang; Luo Yongwei; Zhang Zhijian. Effects of functional groups of –NH₂ and –NO₂ on water adsorption ability of Zr-based MOFs (UiO-66). Chemical Physics.

10. Tang Xingchang; Wang Xiangfei; Yang Lijun. Multifunctional nickel nanofiber for effective air purification: PM removal and NO reduction from automobile exhaust. Journal of Materials Science.

11. Cheng Ganghu; Tang Xingchang*. Zhang Zhijian; Effect of uniaxial compression on the microstructural evolution and magnetic properties of 20Mn23AlV non-magnetic structural steel.Materials Today Communications.

12. Yang Biao; Tang Xingchang*. She Wenna; Exploring potassium trifluoroacetate as a novel electrolyte for enhancing energy density of biomass-derived carbon-based supercapacitors and improving electrolyte-electrode adaptability. Journal of Energy Storage.

13. Qiao Degao; Peng Peng; Tang Xingchang*. First-Principles Study on the Effect of Si Atoms on the Stability and Bonding Properties of Fe/Zn Interface. Metals.

14. Qiao Degao; Peng Peng; Tang Xingchang*. Effect of Si on Interfacial Reactions, Defect Evolution, and Mechanical Properties of Hot-Dip Galvanized Coatings. Metals.

15. Wang Haidong; Wang Zhiwan; Tang Xingchang*. First-Principles Study on the Effect of Si/O Doping on the Stability of the Fe/Zn Interface. Coatings.

16. Qiao Degao; Li Kunyu; Tang Xingchang*. First-Principles Study on Atomic Structure and Fracture Mechanism of α-Fe and AlZnSi Interface. Journal of Materials Engineering and Performance.

17. Chen Chen; Gui Yachen; Tang Xingchang*. Atomic-Scale Study on the Composition Optimization and Deformation Mechanism of FeNiAl Alloys. Metals.

18. Xiang Wang; Gui Yachen; Tang Xingchang*. Molecular Dynamics Simulation of the Effect of B2-NiAl Phase Volume Fractions on Mechanical Properties and Deformation Mechanisms of Dual-Phase FeNiAl Alloys. Metals.

19. Zhao Xiaozhong; Lu Hejie; Tang Xingchang*. Facile synthesis of Sb@Sb₂O₃/reduced graphene oxide composite with superior lithium-storage performance. Journal of Central South University.

20. Duan Yunlong; Hui Yang; Lu Xuefeng; Tang Xingchang*. Microstructure and Property of the Weld Heat-Affected Zone of T4003 Ferritic Stainless Steel with Different Mo Contents. Metals.

21. Ge Shuhai; Zhao Xiaolong; Zhou Weilian; Tang Xingchang*. The Influence of Annealing Temperature on the Microstructure and Performance of Cold-Rolled High-Conductivity and High-Strength Steel. Crystals.

22. Zhang Shuangwu; Zhao Xiaolong; Zhang Jiayin; Tang Xingchang*. Investigation on the Influence of Vacancy and Alloying Element Content on the Performance of Fe/NbN Interface. Metals.

23. Liu Ning; Jin Ke; Ren Junqiang; Tang Xingchang*. Research on Hydrogen/Deuterium Permeation Behavior and Influencing Factors of X52MS Pipeline Steel. Metals.

24. 唐兴昌. 一种高导电性扁钢及其冶炼方法和应用. CN108179354B [P].

25. 唐兴昌；刘亚俊；刘俊钊；等.一种高强高导电性扁钢及其制造方法与应用. CN113913698A [P].

26. 唐兴昌；杜新伟；贾金凤；等.一种动力电池壳用铝合金带材及其生产方法.CN115247239B [P].

27. 唐兴昌；王振铭；刘俊钊；等. 热连轧流程生产钒微合金结构钢的在线性能预测方法及系统. CN113936744B [P].

28. 唐兴昌；刘俊钊；陈克选；等. 一种低碳高强度低电阻率电缆线芯材、制备方法及应用. CN114005602A [P].

29. 唐兴昌；李积鹏；郑跃强；等. 一种经过CSP流程处理的高表面质量环保型免酸洗普通碳素结构钢及其生产方法. CN105331882A [P].

30. 丁万武；唐兴昌；赵小燕；等. 一种 Al-Ti-C-La 复合晶粒细化剂、合金及其制备方法. CN108330308A [P].

31. 丁万武；唐兴昌；赵小燕；等. 一种高硬度铝合金材料制备方法. CN108588518A [P].

32. 罗晓阳；唐兴昌；王正仲；等. 一种基于改进图注意力网络的冷轧钢力学性能预测方法. CN118430715A [P].

33. 王江；唐兴昌；刘俊钊；等.一种机械合金化制备高熵合金粉体的方法. CN114210984A [P].

34. 刘鹏；唐兴昌. 一种低成本高导电性电极扁钢及其冶炼方法. CN110184539B [P].

35. 常崇民；唐兴昌；郑跃强；等. 基于CSP流程热连轧生产线Q235B钢种的性能预测方法. CN105160127B [P].

36. 郑跃强；唐兴昌；李积鹏；等. 一种基于CSP流程热连轧生产线的加速冷却设备. CN205146901U [P].

37. 郑跃强；唐兴昌；王云平；等. 基于CSP工艺的免酸洗汽车大梁钢的生产工艺. CN104789876A [P].

38. 张其文；郭荣平；唐兴昌；等. 基于自适应多支路深度可分离的热轧钢力学性能预测方法. CN117272782A [P].

39. 张其文；王义超；唐兴昌；等. 一种融合多头注意力机制的冷轧钢力学性能预测方法. CN117034755A [P].

40. 丁万武；郭挺彪；唐兴昌；等. 一种Al-Ti-C-La合金及其制备方法. CN108277373A [P].

目前承担的科研项目

1.低碳高导高强钢中微合金析出相及织构的调控机理研究 国家自然科学基金 ；

2.高端装饰用不锈钢材料表面质量评价技术及表面质量影响研究 甘肃省重大专项；

3.高性能掺氢管线钢带研发 甘肃省重大专项；

4.高性能承压设备用系列中厚板关键技术开发和应用 甘肃省重大专项；

5.X80高级别管线钢的组织性能调控及相关机理研究 甘肃省重点研发项目；

6.铁素体不锈钢光亮退火过程中微观组织演变机制及性能调控研究 甘肃省科技项目；

7.铝硅镀层超高强度热成形钢研究与开发；

8.免抛丸高弯曲性能热冲压成形用汽车钢研究与开发；

9.20Mn23AlV无磁结构钢开发；

团队介绍（高性能结构金属全生命周期性能协同研究团队）

https://www.x-mol.com/groups/LUT_Tangteam/contact_us

联系方式

邮箱：tangxingchanglut@163.com；

电话：13609359216